Visconti Calamaio da Viaggio - traveling Inkwell NEW

Visconti Calamaio da Viaggio - Ink travelink Inkpot

Visconti, the creator of the travelling ink pot, proudly introduces its '97 Travelling Ink Pot which makes your piston filling fountain pen convenient, easier, cleaner, safer, faster and more enjoyable. The '97 Travelling Ink Pot lets you fill your fountain pen:

• Anywhere, anytime
• To capacity
• With no ink touching the grip section
• By utilizing 100% of the ink inside the ink pot
• Conveniently, safely, cleanly

No more travelling with glass ink bottles! No more messy grip section! No more pouring ink from a half used bottle into another! Actually, more than a "travelling" ink pot, the '97 Travelling Ink Pot is sure to become your preferred method of filling your fountain pen at home or in your office, as well as when travelling. The Visconti Travelling Ink Pot has been tested on most fountain pens which are currently available. Considering the enormous number of models available we advise you to always carry out a test-fill using water before using the ink pot. ATTENTION: Antique or older pens which use a rubber holder, a lever or a push button for filling can not be filled using this ink pot.

VISCONTI " HIGH VACUUM POWER FILLER:
Instructions for filling your Visconti pen with the Visconti portable ink well.
To practice filling your pen, it is recommended that you try the following operation once or twice with water.

• Remove the stopper, pulling gently
• Fill the ink well with the dropper, taking care not to stain the seal
• Do not overfill!! The correct level is about 1 cm (1/4 inch) below the seal
• Press the pen firmly in into the ink well (the section must secure the seal)
• Unscrew the blind cap of the pen
• Remove the piston from the pen
• Upturn the ink well and the pen
• Press the piston once firmly and count to five
• To increase the capacity of the pen, repeat steps F) and H)
• Turn the ink well again, whilst holding it, re-screw the blind cap to the pen
• Remove the pen from the ink well taking care not to touch the seal with the nib (so as not to stain it)
• Immediately replace the stopper back in the ink well
• Carefully dry the nib
• Inside the stopper there is a piece of cotton wool in case of emergency. Lift the stopper with a coin

VISCONTI PISTON FOUNTAIN PEN:
While filling hold the pen and the ink pot together.
Instructions for filling your piston fountain pens using the Visconti portable ink well.
To practice filling your pen, it is recommended that you try the following operation once or twice with water.

• Remove the stopper, pulling gently
• Fill the ink well with the dropper, taking care not to stain the seal
• Do not overfill!! The correct level is about 1 cm (1/4 inch) below the seal
• Unscrew the blind cap of the pen allowing any remaining ink to drop in the ink well
• Press the pen firmly in into the ink well (the section must secure the seal)
• Upturn the ink well and the pen
• Fill the pen and screw the blind cap back into position
• To increase the capacity of the pen, repeat the filling operation (unscrew the blind cap and screw it back into position)
• Turn until the pen is in the 12 o'clock position and the ink well in the 6 o'clock position and gently remove the pen from the ink well
• Carefully dry the nib and the filler
• Inside the stopper there is a piece of cotton wool in case of emergency. Lift the stopper with a coin